|Cisco 300-206 : Implementing Cisco Edge Network Security Solutions||160 Questions & Answers||Updated: Apr 20,16|
Immediate access to the Cisco 300-206 Exam and 1800+ other exam PDFs.
This is the BEST deal at only $149.00 for unlimited access. Pass FAST with actual answers to actual questions - We Guarantee You Pass!
Both of our Exams Packages come with all of our Cisco Exams including all ActualTests 300-206 tests. Find the same core area Cisco questions with professionally verified answers, and PASS YOUR EXAM.
Option 1: 300-206 exam and 1,800+ Other Exams
OR - Upgrade the Unlimited Access Package to include our Exam Engine. Know more than just the answers, understand the solutions! There is an Exam Engine for each of the 1,800 tests, including Cisco 300-206. Why Upgrade?
Option 2: 300-206 exam, 1,800+ Other Exams PLUS Exam Engine
ActualTests 300-206 Exam Engine Features
Customize your Implementing Cisco Edge Network Security Solutions certification experience.
Cisco 300-206 Exam Tips
Which of these commands will provide detailed information about the crypto man configurations of a Cisco ASA?
A. show crypto map
B. show ipsec sa
C. show run ipsec sa
D. show run crypto map
The TestKing.com network security department wants to adjust the default DoS drop rate thresholds for basic threat detection to trigger logs properly for its network environment. This can give more accurate information about the possibility of a DoS attack. How to set the following values? --Rate interval: 600 sec --Average rate: 50 drops per sec --Burst rate: 100 drops per sec
A. Enter this command at the security appliance CLI: threat-detection rate inspect-drop rate-interval 600 average-rate 50 burst-rate 100.
B. Enable basic threat detection, and enter the values in the activated fields in the Cisco ASDM Threat Detection panel.
C. Enter the values in the fields provided in the Cisco ASDM Threat Detection panel.
D. Enter this command at the security appliance CLI: threat-detection rate dos-drop rate-interval 600 average-rate 50 burst-rate 100.
You are the network security administrator for TestKing.com Corporation. You are asked to configure active/standby failover using Cisco ASDM between two Cisco ASA adaptive security appliances at corporate headquarters. You deploy the Cisco ASDM High Availability and Scalability Wizard and feels confident that the configuration is correct on both security appliances. But, the show failover command output indicates that one interface remains constantly in the waiting state and never normalizes. Which two troubleshooting steps should be taken? (Choose two.)
A. Verify that the security appliances have the same feature licenses.
B. Verify that PortFast is enabled on any switch port that connects to the security appliances.
C. Verify that EtherChanneling is enabled on any switch port that connects to the security appliances.
D. Verify that the line and protocol of the interface are up on the primary and secondary security appliance interfaces.
Which two statements about the downloadable ACL feature of the security appliance are correct? (Choose two.)
A. Downloadable ACLs are supported using TACACS+ or RADIUS.
B. The downloadable ACL must be attached to a user or group profile on a AAA server.
C. The security appliance supports only per-user ACL authorization.
D. Downloadable ACLs enable you to store full ACLs on a AAA server and download them to the security appliance.
What is the effect of the FTP inspection policy named NEW-FTP-MAP on FTP traffic entering the partnernet interface?
A. Blocks the FTP request commands PUT, RNFR, RNTO, DELE, MKD, and RMD.
B. Prevents web browsers from sending embedded commands in FTP requests.
C. Tracks each FTP command and response sequence for certain anomalous activity
D. Prevents all users except 'root' from accessing the path /root.
E. Has no effect on the behavior of the Cisco Adaptive Security Appliance.
Which typical design choices should be taken into consideration while designing Cisco solution-based enterprise remote-access solutions?
A. Authentication: one-time passwords, digital certificates
B. Endpoint Security : Managed endponts versus unmanaged endpoints protection (Cisco Security Agent, Cisco NAC Agent, Cisco Secure Desktop)
C. Traffic protection: IPSec versus SSL
D. Central Site aggregation device: ISR versus Cisco ASA, high-availability options
You are network engineer at TestKing.com . Please point out two functions of Cisco Security Agent.
A. Spam filtering
C. Resource Protection
D. Control of executable content
Which two of the following settings can be monitored by the Cisco Security Agent (release 5.2 and later) to control user's wireless access? (Choose two.)
A. Antivirus Version
B. Protection types such as WEP, TKIP
C. Wireless card type (802.11a,b or g)
You are the network consultant from TestKing.com. Please point out two technologies address ISO 17799 requirements to detecting, preventing and responding to attacks and intrusions.
A. Cisco Security Agent
C. Cisco Security MARS
D. Cisco Secure Access Control Server
All Major Credit CardsWe accept Visa, Mastercard, Electron and American Express. You can also pay us via PayPal.
SSL Secure Transactions